Gigabyte W468N User Manual page 23

Align your fingertip with the finger printer as shown in the drawing
and swipe.
To reduce the damage to the finger printer and fingerprint
recognition problems, follow these guidelines when using the finger
printer.
• Do not scratch or poke the finger printer with your nails or any
hard or sharp objects.
• Do not press the finger printer strongly.
• Do not touch the finger printer with a wet finger or any wet
objects. Keep finger printer surface dry and free of water vapor.
• Do not touch the finger printer with a soiled finger. Minute foreign
particles on a soiled or dirty finger may scratch the finger printer.
• Do not paste stickers or write on the finger printer.
• Do not touch the sensor with a finger or any object with built-up
static electricity.
2.1.6.1 Delete the Finger Printer Data
Saved fingerprint data is stored in the non-volatile memory inside
the finger printer. Fingerprint data are recommended to delete
before you hand over the computer the others, or dispose of it.
To delete the fingerprint data, do the following:
1. Click Start > All Programs > Protector Suite QL > Control.
2. The Protector Suite Software screen is displayed.
3. Click Fingerprints > Delete.
4. Click Settings > Fingerprint Storage Inspector.
5. The Fingerprint Storage Inspector screen is displayed. If
other fingerprint data is still displayed on the list. Select all
fingerprint data and click remove.
6. Check whether all fingerprint data was deleted on the
Fingerprint Storage Inspector screen.
W468N Notebook User's Manual
13