Table of Contents
Advertisement
Set HDD User Password / Set HDD Master Password
Enter this field always shows the message.
While this field is highlighted, press [Enter]. The following message
is shown:
Set HDD Master Password
Enter New Password
Confirm New Password
If there is an old password then setup will prompt with the following
6
window instead and a current password will be required to be
entered at first:
Set HDD Master Password
Enter Current Password
Enter New Password
32
32
Confirm New Password
User can type password in field of Enter New Password, and re-
enter password in field of Confirm New Password for verification.
If verification OK:
Changes have been saved.
The HDD supervisor password is set complete after user press
[Enter].
If verification fails:
[
]
[
]
[
]
[
]
[
]
Setup Notice
[Continue]
Setup Warning
Passwords do not match.
Re-enter password.
[Continue]
If password on boot is required, the password must be set
otherwise it cannot be enabled.
The formats of the password are as follows:
Length:
No more than 8 characters.
Characters: Alphanumeric keys only. The shift status, Ctrl, Shift,
Alt, and Capital, are ignored.
Trusted Platform Support (*)
This item will show up if Trusted Platform Module (TPM) exists in
the system.
Disabled: Disables TPM support.
Enabled:
Enables TPM support.
password.
assword.
Advertisement
Table of Contents
