6VX7-4X Motherboard
A.5 Notices:
1.
In order for STR to function properly, several hardware and software requirements must
be satisfied:
A.
Your ATX power supply must comply with the ATX 2.01 specification (provide more
than 720 mA 5V Stand-By current).
B.
Your SDRAM must be PC-100 compliant.
2.
Jumper JP5 is provided to connect to the STR LED in your system chassis. [Your
chassis may
not provide this feature.] The STR LED will be illuminated when your system is in STR
sleep mode.
6V
STR LED Connector External
1
+
DIMM LED
41