Gestetner P7675 Operating Instructions Manual page 11

Canceling Erase All Memory
For 4 line display model:
A
Press [Stop] while Erase All Memory is in progress.
B
Press [Yes].
Erase All Memory is canceled.
If you stop this before completion, the data is not fully erased. Execute [Erase
All Memory] again to erase the data.
C
Turn off the power.
For 2 line display model:
A
Press the {Job Reset} while Erase All Memory is in progress.
Erase All Memory is canceled.
If you stop this before completion, the data is not fully erased. Execute [Erase
All Mem.] again to erase the data.
B
Turn off the power.
Note
❒ To resume overwriting after power off, turn on the power of the printer, and
then repeat the procedure in "Erase All Memory".
9