Table of Contents
Advertisement
Using PostScript 3
User Code
Use this to set a user code for print logging.
Enter a user code using up to eight digits. A user code identifies a group of users
1
and allows you to check the number of sheets printed under each code with
SmartNetMonitor for Admin.
The following table shows the tabs or menus where you can select this function.
Windows 95/98/Me
Windows 2000/Windows XP
Windows NT 4.0
Macintosh
Reference
For more information about using SmartNetMonitor for Admin, see the Help
file.
Options
See "Setting Up Options" in the Setup Guide for the installation method appro-
priate to your printing environment.
The following table shows the tabs or menus where you can select this function.
Windows 95/98/Me
Windows 2000/Windows XP
Windows NT 4.0
Macintosh
❖ ❖ ❖ ❖ Tray 2
• You can select the tray with the following menu for Paper Feed Unit Type
2600:
Paper Source⇒ p.8
❖ ❖ ❖ ❖ Tray 3
• You can select the other tray with the following menu for an additional Pa-
per Feed Unit Type 2600:
Paper Source⇒ p.8
❖ ❖ ❖ ❖ Duplex Unit
• You can use the following function with AD410:
"Duplex Printing" ⇒ p.6
10
[User Code] on the [Statistics] tab.
[User Code] on the [Job/ Log] tab in the Printing Preferenc-
es Properties.
[User Code] on the [Job/ Log] tab in the Document De-
faults dialog box.
[User Code] on [Job Log] in the print dialog box.
[Option] on the [Accessories] tab.
[Installable Options] on the [Device Setting] tab.
[Option] on the [Device Setting] tab.
[Chooser] on the Apple Menu.
Advertisement
Table of Contents
