User Code - Gestetner DSm755 Use

E
Enter a user ID, file name, and password in the dialog box that appears. The
file name and password are optional.
F
Click [OK].
If you are using Windows 2000, perform the following steps.
G
Start the printing from the application's [Print] dialog box.
Mac OS / Mac OS X
Important
❒ If you are using Mac OS X 10.1.x, this function cannot be used.
If you are using Mac OS X 10.2.x or higher, the Job Type function can be used.
A
In the application, on the [File] menu, click [Print].
The [Print] dialog box appears.
B
In the pop-up menu, click [Job Log].
C
On the [Job Type:] pop-up menu, click [Document Server].
D
Enter a user ID, file name, and password in the dialog box that appears. The
file name and password are optional.
E
Start the printing from the application's [Print] dialog box.

User Code

Use this to set a user code for print logging.
Enter a user code using up to eight digits. A user code identifies a group of users
and allows you to check the number of sheets printed under each code with
SmartDeviceMonitor for Admin.
The following table shows the tabs or menus where you can select this function.
Windows 95 / 98 / Me
Windows 2000 / XP, Windows Serv-
er 2003
Windows NT 4.0
Mac OS
Mac OS X
Reference
For details about using SmartDeviceMonitor for Admin, see Help.
[User Code] on the [Statistics] tab.
[User ID:] on the [Job Log] tab in the Printing Preferences
dialog box.
[User ID:] on the [Job Log] tab in the Document Defaults
dialog box.
Select the [Enable User Code] check box, and then enter a
user code in the [User Code] box on [Job Log] in the print
dialog box.
Select the [Enable User Code] check box, and then enter a
user code in the [User Code] box on [Job Log] in the print
dialog box.
Printing a Document
89
3