Installing Ps440/Ps420 (Paper Feed Unit) - Gestetner P7032 Setup Manual

Installing PS440/PS420 (Paper
Feed Unit)
R CAUTION:
• Before installing options, the ma-
chine should be turned off and
unplugged for at least thirty min-
utes. Components inside the
machine become very hot, and
can cause a burn injury if
touched.
• When lifting the machine, use
the grips on both sides. The ma-
chine could break or cause an in-
jury if dropped It is dangerous to
handle the plug with wet hands.
Doing this may result in receiving
an electric shock.
• Before moving the machine, un-
plug the power cord from the out-
let. If the cord is unplugged
abruptly, it could become dam-
aged. Damaged plugs or cords
can cause an electrical or fire
hazard.
There are two types of paper feed
units: PS440 (1000-sheet paper feed
unit) and PS420 (2000-sheet paper
feed unit). Only one of them can be in-
stalled at once. The installation of
PS440 is described below.
Important
❒ You can load A4 long-edge feed
(Metric version) or 8
long-edge feed (Inch version) size
into PS420. If you want to change
the paper size A4 to 8
(Metric version) or 8
A4 (Inch version), contact your
sales or service representative.
A
1.
2.
3.
4.
5.
• Installation Guide
B
" × 11"
1
/
2
" × 11"
1
/
2
" × 11" to
1
/
2
Confirm that the box contains the
following items.
1
2
3
4
5
Screws (4 pcs)
Securing brackets (2 pcs)
Cover 1
Cover 2
Screws (3 pcs)
Note
❒ The paper size seal and the tray
number seal are included only
with the printer.
Turn off the printer, and remove
all cables and cords from the
printer.
Installing Options
2
ZAEP380E
21