Setting Up The Printer; Unpacking The Printer And Checking The Contents Of The Box - Gestetner P7032 Setup Manual

2. Setting Up the Printer

Unpacking the Printer and Checking the
Contents of the Box
R CAUTION:
• To prevent injuries, this printer
should be lifted by at least two
people.
A
Check the contents of the box ac-
cording to the following list. If
any items are missing, please con-
tact your sales or service represen-
tative.
• Setup Guide (this manual)
• Additional documentation
• CD-ROM labeled "Printer Driv-
er and Utilities"
• Ferrite core
• Paper size seal
• Tray number seal
Important
❒ The interface cable is not includ-
ed in the box. It is your respon-
sibility to provide the interface
cable appropriate for the com-
puter you are using. ⇒ P.57
"Connecting the Printer"
❒ The toner bottle is not included
in the box. Consult your sales or
service representative about the
toner bottle.
B
Remove the adhesive tape from
the printer as shown in the illus-
tration.
Note
❒ Do not remove the adhesive
tape from the power cord, if you
want to install the optional pa-
per feed unit.
C
Slide tray 2 out (A A A A ), and release
the side guide adhesive lever (B B B B ),
and then slide the side guide
while pressing the release lever
(C C C C ).
ZAEH300E
ZAEH350E
11