Table of Contents
Advertisement
CDD
USER GUIDE
WALL MOUNTING – PROCEDURE
CDD5 only
A pair of CDD5 wall brackets is supplied with the speakers. The bracket is a three-part design
which allows adjustment in both horizontal and vertical planes if required.
First fix:
First decide whether adjustment is needed in one or both planes, and then disassemble the
bracket. To obtain both horizontal and vertical adjustment, separate the wall section of the
bracket using a 4 mm hex key. The wall section is easily identified as it has the larger flange
with fixing holes on 45 mm centres; the cabinet section is smaller and has countersunk holes
on 35 mm centres.
If only one plane of adjustment is required - either vertical or horizontal - remove the link section
in the middle; this is also secured with a 4 mm hex head bolt.
CDD User Guide V1.1
19
Advertisement
Table of Contents
