Table of Contents
Advertisement
ADJUSTING THE AUDIO SETTINGS
To adjust the audio settings:
Audio
1. Press the Menu button on the
Speakers
remote. The on-screen menu
Volume Control Display
is displayed.
Surround Sound
Volume Leveling
2. Use the Arrow buttons on the
remote to highlight Audio and
Balance
press OK. The AUDIO menu
Lip Sync
is displayed.
Digital Audio Out
Analog Audio Out
3. Use
the
Arrow
buttons
to
highlight the setting you wish
Left/
to
adjust,
then
press
Right Arrow buttons to change
the setting:
•
Speakers - Turns the built-in
speakers On or Off.
When the TV speakers are set to On, DTS signals
cannot be passed through digital audio outputs.
•
Volume Control Display - Toggle between On or Off to
hide or display the on-screen volume slider that appears
when volume is adjusted.
•
Surround Sound - Surround sound uses DTS TruSurround
to deliver an immersive surround sound experience from
the TV's internal speakers. TruSurround completes the
entertainment experience by providing deep, rich bass
and by delivering crisp details and clear, intelligible dialog.
Select On or Off.
•
Volume Leveling - Volume leveling uses DTS TruVolume
to maintain consistent volume levels during transitions
between program content, AV formats, and input sources.
Select On or Off. In a few cases, volume leveling may
artificially suppress volume increases, making it difficult to
hear dialog or flattening sudden noises. If this occurs, turn
volume leveling off.
•
Balance - Adjusts the loudness of the audio output from the
left and right speakers.
•
Lip Sync - Adjusts the synchronization between the display
Back
image and the accompanying audio track.
Auto
•
Digital Audio Out - Changes the type of processing for
On
digital audio out and HDMI ARC output when connected to a
On
home theater audio system. Select Auto, PCM, Dolby D or
Off
Bitstream.
0
0
You must select Bitstream for audio with more than
two channels (3.0, 5.0, or 5.1, for example).
Auto
Fixed
•
Analog Audio Out - Sets the volume control properties for
the RCA connector when connected to a home theater audio
system. Select Variable if you are controlling the volume with
the TV's volume controls, or select Fixed if an external audio
device (sound bar or AV receiver) will control the volume.
4. When you have finished adjusting the audio settings, press the
Exit button on the remote.
™
™
3
21
Advertisement
Table of Contents
