Table of Contents
Advertisement
When you use standard paper
2
(47.1 g/m
to 105 g/m
28 lb)
A Adjust the side plates to match
the paper size scale on the end
plate side.
C C C C
Lower or lift the paper alignment
wings by turning the left and
right knobs.
Note
❒ When the guides are up, you
might not be able to load the
u nit to full capa city (1,0 00
sheets) depending on the paper
you are using.
❒ Lift the paper alignment wings
if B5L prints are curled.
When you use 81.4 g/m
or thicker paper
A Lower the paper alignment
wings.
When you use 81.4 g/m
or thinner and B5 or smaller
paper
A Lower the paper alignment
wings.
2
, 12.5 lb to
D D D D
2
, 21.6 lb
2
, 21.6 lb
When you use 81.4 g/m
or thinner and A4, 8
larger paper
A Lift the paper alignment wings.
When you use A4, 8
paper
A Swing out the guides as shown
in the illustration.
Turn on the main switch.
Note
❒ You can have the machine dis-
play how much ink and master
are left when you switch it on.
See "User Tools—Ink/Master
Left" on p.146 "4. Mode Set-
ting".
Printing Preparations
2
, 21.6 lb
× 11" or
1
/
2
" × 11"KL
1
/
2
ZDZY020E
TPEH021E
17
1
Advertisement
Table of Contents
