Table of Contents
Advertisement
7)
Press qw to switch the item.
f The items will switch each time you press the button.
[2.x.x.x]
[10.x.x.x]
[MANUAL]
f When [2.x.x.x] or [10.x.x.x] is selected in Step 7), proceed to Step 9).
8)
Press as to select each item, and change the settings according to the operation instructions of the
menu.
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[DNS1]
[DNS2]
9)
Press as to select [STORE], and press the <ENTER> button.
f Press as to select [RETURN] and then press the <ENTER> button to return to the [Art-Net (WIRED
LAN)] screen (1/2).
10) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Note
f When the network address is changed in the [NETWORK] menu → [WIRED LAN] (x page 82), the address is reflected in the address for
[MANUAL] of this [WIRED LAN] setting.
Setting address for [WIRELESS LAN]
1)
Press as to select [Art-Net].
2)
Press qw to select [WIRELESS LAN].
3)
Press the <ENTER> button.
f The [Art-Net (WIRELESS LAN)] screen (1/3) is displayed.
4)
Press as to select each item, and change the settings according to the operation instructions of the
menu.
[NET]
[SUB NET]
[UNIVERSE]
[START ADDRESS]
5)
Press as to select [NEXT] and press the <ENTER> button.
f The [Art-Net (WIRELESS LAN)] screen (2/3) is displayed.
6)
Press as to select each item, and change the settings according to the operation instructions of the
menu.
90 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Sets the IP address to 2.x.x.x automatically.
Sets the IP address to 10.x.x.x automatically.
Sets the IP address manually.
Set to [ON] when obtaining an IP address automatically using a DHCP server. Set to [OFF] when not
using a DHCP server.
Enter the IP address when not using a DHCP server.
Enter the subnet mask when not using a DHCP server.
Enter the default gateway address when not using a DHCP server.
Enter the primary DNS server address when not using a DHCP server.
Enter the secondary DNS server address when not using a DHCP server.
Enter the net setting of the control console to be connected to the projector.
Enter the subnet setting of the control console to be connected to the projector.
Enter the universe setting of the control console to be connected to the projector.
Enter a start address where the projector processes Art-Net.
Advertisement
Table of Contents
