Table of Contents
Advertisement
Chapter 2 Getting Started — Installing/removing the projector
1)
Loosen the ball joint fixing screw.
f Loosen the ball joint fixing screw using the supplied Allen wrench (opposite side size 5.0 mm (3/16")).
2)
Adjust the orientation of the main unit.
f Rotate the shaft holder and adjust the ball joint movable part to the direction to tilt the main unit, and adjust
the orientation of the main unit.
Main unit
The shaft holder will rotate 360° when the ball
joint fixing screw is loosened.
Rotate the shaft holder and move the ball joint
movable part to the direction to tilt the main unit.
Shaft holder
360°
The ball joint will become free when the ball joint stopper is removed.
The main unit can be rotated 360° or the main unit can be tilted 90° at
the ball joint movable part.
Ball joint fixing screw
Ball joint stopper
Pole
Shaft holder
Ball joint fixing screw
Ball joint stopper
Ball joint movable part
Ball joint movable range:
Approximately 90°
360°
ENGLISH - 39
Advertisement
Table of Contents
