Panasonic PT-JX200GWU Operating Instructions Manual page 35

Chapter 2 Getting Started — Installing/removing the projector
f The string is used to prevent the adapter cover from falling off. Be sure to use the projector with the string
put on the connector secure lock.
String
8) Align the orientation of the power supply unit to the track system.
f Align the orientation as follows.
g When using the track system of Nordic Aluminium, align the side with the levers A/B (projector) to the side
with the protrusion (track system).
g When using the track system of EUTRAC Stromschienen or ERCO, align the side with the levers A/B
(projector) to the side without the groove (the track system).
f For details of the track systems compatible with the projector, refer to "Before mounting" (x page 31).
Lever A
9) Mount the track mount part of the power supply unit to the track system.
f Insert the hook clasps of the track mount parts A/B into the opening of the track system.
f The adapter of the projector cannot be mounted to the position of the tapping screw fixing the track system
to the ceiling or beam.
10) Align the lever A parallel to the track system, and completely turn the lever B to the same side.
i) Turn the lever A in the direction of the arrow shown in the figure to align it parallel to the track system.
ii) Completely turn the lever B in the direction of the arrow shown in the figure.
f Be sure to operate the lever A first.
Tab
Track system
Lever B
Power supply unit
Track system
For Nordic
Aluminium
Protrusion
For EUTRAC
Stromschienen
Groove
For ERCO
Groove
ENGLISH - 35