Table of Contents
Advertisement
Chapter 2 Getting Started — Installing/removing the projector
f Confirm that both hook clasps A/B are securely housed inside the track system.
(i)
Lever A
WARNING
When mounting to the track system, turn both levers A/B all the way until they hit the end.
Inadequate mounting to the track system may result in the projector falling off.
11) Fix the lever A locking screw.
f Tighten the lever A locking screw (M3) using a Phillips screwdriver (ISO No. 2, diameter: 6 mm (1/4")), and
fix to the lever plate A.
12) Fix the lever B locking screw.
f Tighten the lever B locking screw (M3) using a Phillips screwdriver (ISO No. 2, diameter: 6 mm (1/4")), and
fix to the lever plate B.
Lever B
Lever B locking screw
36 - ENGLISH
Lever plate A
Lever A
Lever plate B
(ii)
Lever B
Cross section
Lever A locking screw
Cross section
Lever B locking screw
Lever plate B
Lever B
Advertisement
Table of Contents
