Displaying The Break Timer - Sharp PG-C45XU Operation Manual

Displaying the Break Timer

This function can be used to show the remaining time for break during meeting.
Displaying and Setting
the Break Timer
1
Press . The break timer
starts to count down from 5
minutes.
2
When " " is displayed, press
' ' , " ' ' " " " " , \ \ \ \ \ or | | | | | to set the break
'
timer.
• You can set anywhere between 1 and
60 minutes (in 1 minute units).
• The break timer starts to count down
as soon as ' , " , \ or | is pressed.
3
Press to cancel the break
timer.
Note
• Auto Power Off will be temporarily dis-
abled during the break timer.
When no input signal is detected for more
than 15 minutes, the projector will auto-
matically shut off if the break timer has
elapsed.
• The break timer will be displayed on the
startup image. To change the screen dis-
played during the break timer, change the
setting of "Startup Image" (see page 68).
"On-screen Display
' " \ |
, , ,
buttons
BREAK TIMER
button
-59