Operating With The Remote Control; Displaying And Setting The Break Timer; Displaying The Pointer; Using The Spot Function - Sharp PG-LW2000 Operation Manual

Operating with the Remote Control

Displaying and Setting the
Break Timer
1 1
Press BREAK TIMER.
• The timer starts to count down from 5
minutes.
On-screen display
2 2 Press P/R/O/Q to adjust the
length of the break time.
Increases with P or Q
•
5 minutes ➞ 6 minutes ➞ 60 minutes
Shortens with O or R
•
4 minutes ➞ 3 minutes ➞1 minute
• The break time can be set in units of one
minute (up to 60 minutes).
Canceling the break timer display function
Press BREAK TIMER.
Note
• The Break Timer is not available while the
projector is operating the following functions.
- Auto Sync
- Freeze
- AV Mute
- Input Search
30
MAGNIFY buttons

FREEZE button

PICTURE MODE button

AUTO SYNC button

BREAK TIMER button

SPOT button
Adjustment buttons
(P/R/O/Q)

EFFECT button

ECO+QUIET button

POINTER button

Displaying the Pointer

1 1 Press POINTER and press P/R/
O/Q on the remote control to
move the pointer.
• Press EFFECT to change the pointer icon
(5 types).
Star Finger1
2 2
Press POINTER again.
• The pointer will disappear.

Using the Spot Function

1 1 Press SPOT and press P/R/O/Q
on the remote control to move
the spot area.
• Press EFFECT to change the spot area
size (3 types).
1/9 1/25
2 2
Press SPOT again.
• The spot area will disappear.
Switching the Eco+Quiet
Mode
Press ECO+QUIET to switch the
Eco+Quiet mode between on and off.
• When the Eco+Quiet Mode is set to "ON", the
sound of the cooling fan will turn down, the power
consumption will decrease, and the lamp life will
extend.
Note
• Refer to "Eco+Quiet" on page
Finger2 Heart Underline
1/8
40 for details.