Saeco PicoBaristo HD8927/06 Manual page 33

3 Press the release buttons on the milk froth dispensing spout and remove
1
2
4 Pull the milk frother connection out of the milk frother.
5 Rinse all components under a lukewarm tap.
Reassembling the milk carafe
1 To reassemble the milk froth dispensing spout, follow steps 2 to 4 of
2 Place the milk froth dispensing spout back in the top of the milk carafe.
3 Place the top of the milk carafe back on the milk carafe.
Monthly cleaning of the milk carafe
Only use SAECO milk circuit cleaner CA6705 for this cleaning cycle.
the milk frother from the the rubber support.
Tip: All detachable parts, except the carafe, can be cleaned in the
dishwasher.
'Disassembling the milk froth dispensing spout' in reverse order.
Note: Before you place the milk froth dispensing spout back in the top of
the milk carafe, move the pin inside the top to the correct position. If this
pin is not in the correct position, you cannot place the milk froth
dispensing spout back in the top of the milk carafe.
English
33