Saeco PicoBaristo HD8927/06 Manual page 12

English
12
PRIMING
HEATING UP
RINSING
ACTIVATE
AQUACLEAN FILTER?
2 MIN
INSERT FILTER
FILL WATER TANK
13 The display shows the priming icon. The progress bar shows the progress
of the priming cycle.
14 The machine heats up and the display shows the temperature icon.
15 Empty the container and place it under the coffee dispensing spout.
16 The machine starts rinsing water through the coffee dispensing spout.
The display shows the rinsing icon and a progress bar.
Note: Do not interrupt the rinsing cycle.
17 The display asks: Activate AquaClean filter?
Note: If you want to install the AquaClean filter later, press the ESC
button and continue with the manual rinsing cycle. For installation at a
later time, see chapter 'AquaClean filter'.
18 If you want to install the AquaClean filter, press the OK button. Activation
will take 2 minutes. The display reminds you: Insert filter, fill water tank.
19 Remove the AquaClean filter from its packaging. Shake the filter for about
5 seconds.