Table of Contents
Advertisement
To scan multiple documents in a batch from the ADF can increase your work
efficiency and make large scanning tasks easier. The ADF of this scanner accepts a
variety of paper and stationery you may use in your daily work or personal life, such as:
Normal paper whose size and ream weight meet the requirements stated in
"Appendix A: Specifications" of this guide.
Notched paper
Coated paper (e.g., brochure)
Attention
However, don't use the ADF to scan documents if they meet any of the following
conditions:
Paper lighter than 50 g/m
Paper with clips or staples attached
Paper with inconsistent thickness, e.g., envelops
Paper with wrinkles, curls, folds, or tears
Paper with an odd (non-rectangular) shape
Paper with static electricity
Tracing paper
Carbon paper, pressure sensitive paper, carbonless paper
Items other than paper, e.g., cloth, metal foil.
To prevent paper feeding errors and damages to
the ADF unit, strictly follow the instructions below:
Remove all small objects e.g., paper clips,
pins, staples or any other fasteners attached,
before loading the paper into the ADF.
Make sure the paper is completely flat with no
creased or curled corners.
Avoid scanning documents with pencil lead
and newspaper clippings as they will make
the ADF exposure glass and the inner ADF
dirty. If you have to scan such paper, clean
the scanner frequently (refer to "Chapter III.
Care and Maintenance" of this guide for more
information).
The paper for each batch scanned by ADF
can be of the same or different weights.
However, make sure the length of each scan
batch is the same.
2
(14 lb.) or heavier than 105 g/m
13
2
(28 lb.)
Advertisement
Table of Contents
