Table of Contents
Advertisement
Attention
1. Plug the AC adapter into the scanner's power receptor
2. Plug the other end of the AC adapter into a standard AC power outlet.
3. Plug the square end of the included USB cable to the USB port
the scanner.
4. Plug the rectangular end of the USB cable to an available USB port on your
computer.
5. If you plan to connect your scanner to a USB hub
connected to the USB port in your computer. Next, connect the scanner to the USB
hub.
If your scanner has the USB hub function
connection steps:
7
The USB hub is not included with the scanner.
8
This function may or may not be available depending on the scanner model you purchase.
Please make sure the scanner is turned OFF
before you plug or unplug the scanner power
adapter.
13
.
7
, make sure that the hub is
8
, please follow the below
at the rear of
Advertisement
Table of Contents
