Danby DPA060C2WDB Owner's Use And Care Manual page 11

Installation Instructions
INSTALLATION IN A
DOUBLE-HUNG SASH
WINDOW
1. Measure the adhesive foam seal to fi t the windowsill. Then cut the foam seal to
the proper length and attach it to the windowsill.
2. Adjust the length of the window slider kit to fi t the width of the window. Shorten
the adjustable window kit to fi t the width of the window if less than 70 cm (27.6
inches). Open the window sash and place the window slider kit on the window-
sill.
3. Cut the foam seal (adhesive type) to the proper length and attach it on the top
of the window slider kit. Close the window sash securely against the window
slider kit.
4. Cut the foam seal to an appropriate length and seal the open gap between the
top window sash and outer window sash.
7
Foam seal
(adhesive type)
70 cm - 203 cm
27.6 inches - 80 inches
Windowsill
Window Kit
Windowsill
Foam seal
Window Kit
Foam Seal