When You Cannot Connect Using Wi-Fi Direct (Simple Ap) Connection - Epson L405 Series User Manual

User's Guide
❏ Most access points have a privacy separator feature that blocks the communication from unauthorized devices.
If you cannot connect to the network even if the devices and access point are connected to the same SSID,
disable the privacy separator on the access point. See the manual provided with the access point for details.
Related Information
"Checking the SSID Connected to the Printer" on page 103
&
"Checking the SSID for the Computer" on page 104
&
When You Cannot Connect Using Wi-Fi Direct (Simple AP)
Connection
If four devices have already been connected, you cannot connect any more devices. See the following and try to re-
connect.
Check how many devices are connected
Check how many devices are connected to the printer. If the number of connected devices has not exceeded the
maximum, a connection error may have occurred. Move the printer and computer or smart device closer to the
access point to help with radio wave communication, check that the SSID and password are correct, and then try
to make network settings again.
❏ Network status sheet
Solving Problems
102