Table of Contents
Advertisement
Installation Guide
Touch Unit
The following supplied products are necessary when attaching the Touch Unit. Confirm that you have all
items before beginning. When installing the Touch Unit outside the whiteboard, use the supplied Touch Unit
Bracket.
Touch Unit
Markers x2
Spacer for screw hole x3
When installing the Touch Unit on a non-magnetic whiteboard, prepare three commercially available M4
screws.
Touch Unit Bracket
Installation plate
M4 x 10 mm hexagon socket head
cap bolts x2
For the installation plate, you also need three commercially available 4 mm diameter wood screws, or three
M4 anchor bolts.
Label x4
M4 x 25 mm hexagon socket head
cap bolts x2
15
Touch Unit connection cable (approx. 2.8 m)
Infrared deflectors
(approx. 28.5 cm) x8
Tape for securing the markers
(approx. 6 cm) x12
Securing plate
M4 x 55 mm hexagon socket head cap
M4 x 70 mm hexagon socket head cap
bolt x1
bolt x1
Advertisement
Table of Contents
