Solving Multi-Projection Problems; Solving Touch Unit Setup Problems - Epson BrightLink 1485Fi User Manual Supplement

Solving Multi-Projection Problems

Check the solutions in these sections if you have problems while combining
the projected images from two or more projectors to create one unified image
area.
g g Related Links
• "Solving Touch Unit Setup Problems"
• "Adjusting an Image Color Between Projectors"
• "Adjusting an Image Area" p.26
• "Solving Other Multi-Projection Problems"

Solving Touch Unit Setup Problems

If you see a touch unit setup error, try the following steps. You can use this
solution when you combine the projected images from two projectors using
the edge blending feature.
This solution applies to the firmware version under 1.50.
a Press the [Menu] button on one projector, and then select Installation
> Touch Unit > Touch Unit Setup.
p.22
p.25
p.28
b Follow the on-screen instructions to perform touch unit auto
adjustment. See your projector's Installation Guide for details on the
auto adjustment.
c Press the [Menu] button on the other projector, and then select Multi-
Projection > Edge Blending.
22