Installation Guide
When installing the Touch Unit on the whiteboard (without using the Touch Unit Bracket)
a
Installing the Touch Unit (
b
Adjusting the Angle of Laser Diffusion (
c
Performing Touch Calibration (
When two or more projectors are installed in parallel
When using the multi-projection function (when multiple projectors are installed in parallel to project one,
large screen), follow the steps below.
a
Installing the Setting Plate and the Projector (
b
Adjusting the Position of the Projector (
c
Setting the Projector ID (
d
Adjusting the Image in Multi-Projection (
When two projectors are installed in parallel and you want to use the interactive function, make the following
settings. Make the settings for each projector.
a
Setting Projector Synchronization (
b
Setting Multi-Projection Interactive (
p.88)
s
p.92)
s
p.85)
s
s
p.46)
s
p.96)
s
p.99)
s
p.100)
s
p.102)
s
p.33)
12