Calibrating The Pen - Epson EB-1470Ui Installation Manual

Installation Guide
e
Select the side you want to correct
f
Correct the selected side
If the message "Cannot adjust any further."is displayed while adjusting, you cannot adjust the shape
any further in the direction indicated by the gray triangle.
g
Repeat steps 5 and 6 as needed to adjust any remaining sides

Calibrating the pen

Check that adjusting the position of the projector is complete before you start calibrating the interactive pen.
"Adjusting the Position of the Projector"
s
There are two methods available for calibrating the pen; Auto Calibration and Manual Calibration. When
calibrating the pen for the first time after installing the projector, perform Manual Calibration for optimum
calibration.
For the Auto Calibration method, see the projector's User's Guide (on the Document CD-ROM).
c
When two projectors are installed in parallel and you are using the interactive function, set the multi-
projection interactive features before adjusting the pen.
"When two projectors are installed in parallel and you are using the interactive function"
s
p.46
55
p.100