Maintenance; Cleaning Your Tv; Screen, Frame, Cabinet And Stand; Power Cord - LG LA98 Series Owner's Manual

Hide thumbs Also See for LA98 Series:
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 31

MAINTENANCE

Cleaning your TV

Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
y Make sure to turn the power off and disconnect the power cord and all other cables
first.
y When the TV is left unattended and unused for a long time, disconnect the power cord
from the wall outlet to prevent possible damage from lightning or power surges.

Screen, frame, cabinet and stand

y To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
y To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a
diluted mild detergent. Then wipe immediately with a dry cloth.
CAUTION
y Avoid touching the screen at all times, as this may result in damage to the screen.
y Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as
this may result in scratches and image distortions.
y Do not use any chemicals as this may damage the product.
y Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric
shock, or malfunction.

Power cord

Remove the accumulated dust or dirt on the power cord regularly.

TROUBLESHOOTING

Problem
Solution
Cannot control
y Check the remote control sensor on the product and try again.
the TV with the
y Check if there is any obstacle between the product and the remote
remote control.
control.
y Check if the batteries are still working and properly installed (
to
No image
y Check if the product is turned on.
display and
y Check if the power cord is connected to a wall outlet.
no sound is
y Check if there is a problem in the wall outlet by connecting other
produced.
products.
The TV turns off
y Check the power control settings. The power supply may be interrupted.
suddenly.
y Check if the Automatic Standby (Depending on model) / Sleep
Timer / Off Time feature is activated in the TIME settings.
y If there is no signal while the TV is on, the TV will turn off
automatically after 15 minutes of inactivity.
When connecting to
y Turn the TV off/on using the remote control.
the PC (HDMI), 'No
y Reconnect the HDMI cable.
signal' or 'Invalid
y Restart the PC with the TV on.
Format' is displayed.
MAINTENANCE / TROUBLESHOOTING
).
33
to
,

Advertisement

Table of Contents
loading

Table of Contents