LG LA98 Series Owner's Manual page 38

8
SAFETY INSTRUCTIONS
y Make sure there are no objects between the remote control and
y
its sensor.
y Signal from Remote Control can be interrupted due to external/
y
internal lighting eg Sunlight, fluorescent lighting.
If this occurs turn off lighting or darken viewing area.
y When connecting external devices such as video game consoles,
y
make sure the connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or
damage the product.
y Do not turn the product On/Off by plugging-in or unplugging the
y
power plug to the wall outlet. (Do not use the power plug for
switch.)
It may cause mechanical failure or could give an electric shock.
y Please follow the installation instructions below to prevent the
y
product from overheating.
- The distance between the product and the wall should be more
y
than 10 cm.
- Do not install the product in a place with no ventilation (e.g., on
y
a bookshelf or in a cupboard).
- Do not install the product on a carpet or cushion.
y
- Make sure the air vent is not blocked by a tablecloth or curtain.
y
Otherwise, this may result in fire.
y Take care not to touch the ventilation openings when watching the
y
TV for long periods as the ventilation openings may become hot.
This does not affect the operation or performance of the product.
y Periodically examine the cord of your appliance, and if its appearance indicates
y
damage or deterioration, unplug it, discontinue use of the appliance, and have the
cord replaced with an exact replacement part by an authorized servicer.
y Prevent dust collecting on the power plug pins or outlet.
y
This may cause a fire hazard.
y Protect the power cord from physical or mechanical abuse, such
y
as being twisted, kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall outlets, and the point
where the cord exits the appliance.
y Do not press strongly upon the panel with a hand or sharp object
y
such as nail, pencil or pen, or make a scratch on it, as it may
cause damage to screen.