Table of Contents
Advertisement
TRENDnet User's Guide
External file
To playback the video files saved on the USB drive, click and select the External File
playback mode.
Select the USB device to browse the files. Click Refresh to update the list when
necessary.
Click
to view the video and use the playback control to control the playback.
© Copyright 2018 TRENDnet. All Rights Reserved.
Access your NVR with the Web Browser
Default Settings and Factory Reset
To manage your NVR through the web browser, you have to setup the network
connection first. If you didn't set up your NVR attaching to your home/business
network, please enable NVR's DHCP client. Click Apply and then restart the NVR. If
you have already installed your cameras, you have to manually change their
settings. (You don't have to do anything for plug‐and‐Play models connected
directly on PoE ports.) Check the network status when necessary to make sure the
NVR gets the IP address from your network.
Here's the list of your NVR's factory default settings:
System Default
Management IP: 192.168.10.60.
Administrator name: admin
Administrator password: admin
Note: If you are not having a brand new NVR, you may not know what password
was setup on the NVR. In this case, you have to call our 24‐hour tech support to get
temporary access code to reset the NVR.
TV‐NVR408
70
Advertisement
Table of Contents
