Table of Contents
Advertisement
2.3
Generic Installation Instructions (All Providers)
Automated Script
Ubuntu 18.04 64
The following command can be executed on any system running the
bit Linux
operating system.
Ensure the system has internet access and execute the commands below as the root user to install
DVS-200.
wget
http://updates.datavideo.co.uk/updates/debian/install-dvs200.sh
-O - | bash
After a successful installation the stream server's web interface will be running on port 80.
Manual installation (Advanced Users)
Packages
http://updates.datavideo.co.uk/updates/debian/ffmpeg_3.4.5+git1~bionic_amd64.deb
http://updates.datavideo.co.uk/updates/debian/nginx-dvss_1.15.11-4bionic59ubuntu1_amd64.deb
http://updates.datavideo.co.uk/updates/debian/nginx-dvss-webui_1.12ubuntu46_all.deb
http://updates.datavideo.co.uk/updates/debian/hhvm_3.30.3-1~bionicubuntu1_amd64.deb
Hardware I/O Card Support
Datavideo
Datavideo have a range of hardware encoding cards, such as a 4/8-CH SDI input card or a 4/8-CH
HDMI input card, all are supported by the driver package below.
http://updates.datavideo.co.uk/updates/debian/datavideo+h264+cards_1.1.0.101.637_amd64.deb
Please Note: If you did not install DVS-200 using our automated script you will need to disable
apparmor before installing the Datavideo card drivers.
sudo systemctl stop apparmor
sudo systemctl disable apparmor
Blackmagic Design
We support all Decklink, Mini Monitor and Mini Recorder cards by Blackmagic Design. You must
install Desktop Video version 10.8.4 or newer.
12
Advertisement
Table of Contents
