Set The Timer; Set Sleep Timer - Philips NTX400/77 User Manual

Note
•
If the USB device does not have enough memory to
store the audio files, a message about a full memory is
displayed.
•
With MP3-CD playback, you can only record all tracks
in the current folder.

Set the timer

If a timer is set, the product will be turned on
automatically after a preset time.
Note
•
Make sure that clock is set correctly.
1
In standby mode, press and hold TIMER
for two seconds.
» [TIMER SET] is displayed, then a
prompt to select the sound source is
displayed.
2
Press / repeatedly to select a sound
source: DISC, USB, FM, or AM.
3
Press TIMER to confirm.
» [12H] or [24H] is displayed.
4
Press / to select 12 hour or 24 hour
format.
5
Press TIMER to confirm.
» In 12 hour format, [AM] or [PM] is
displayed. Repeat steps 4 to 5 to select
AM or PM. Then the hour digits begin
to flash.
» In 24 hour format, the hour digits begin
to flash.
6
Repeat steps 4 to 5 to set the hour,
minute, and the volume of the sound
source.
» If the product is in standby or Eco
power standby mode, the selected
sound source will be activated when
the preset time comes.
18 EN
Note
•
To cancel timer setting, press
•
During timer setting, if no action is taken within
90 seconds, the product exits timer setting mode
automatically.
Activate or deactivate the timer
In standby mode, press TIMER repeatedly
•
to activate or deactivate the timer.
» If the alarm timer is activated, [TIMER
ON] is displayed.
» If the alarm timer is deactivated,
[TIMER OFF] is displayed.

Set sleep timer

When the product is turned on, press SLEEP
repeatedly to select a period of time (in
minutes).
» The product switches to standby
mode automatically after the preset
time period.
» When [SLEEP OFF] (sleep off)
is displayed, the sleep timer is
deactivated.
.