Parameters Specific To Each Instrument - Roland VAD506 Data List

Parameters Specific to Each Instrument

KICK
Parameter
[F1] button (INST tab)
Tuning
Muffling
[F2] button (EDIT tab)
Shell Depth
Head Type
Beater Type
Snare Buzz
Low Level
Low Decay
Kit Resonance
SNARE/CROSS STICK/SNARE BRUSH
Parameter
[F1] button (INST tab)
Tuning
Muffling
[F2] button (EDIT tab)
Shell Depth *1
Head Type *1
Overtone *1, *2, *4
Strainer Adj. *2
Wire Level *2
XStick Inst *3
XStick Inst Volume *3
*1: Unavailable if the instrument group is CROSS STICK.
*2: Unavailable if the instrument group is SNARE BRUSH.
*3: This is shown only if the SNARE/CROSS STICK instrument is assigned to the rim of the snare (or to the rim of a digitally connected pad that is assigned to snare)
*4: For some instruments, this cannot be set.
* PINSTRIPE is a registered trademark of Remo Inc., U.S.A.
Value
-100–100
OFF, TAPE1–4, BLANKET1–3, WEIGHT1, 2
1.0–30.0
CLEAR, COATED, PINSTRIPE
FELT1, 2, WOOD, PLASTIC1, 2
OFF, 1–8
-5–NORMAL–+5
-2–NORMAL–+2
OFF, 1–8
Value
-100–100
OFF, TAPE1–7, DONUT1, 2
1.0–30.0
CLEAR, COATED, PINSTRIPE
-5–NORMAL–+5
LOOSE1–3, MEDIUM1–3, TIGHT1–3
-4–NORMAL–+5
1–16
-INF–+6.0dB
Explanation
Tuning of the head
MEMO
You can also change the value of this setting by using the [TUNING] knob.
Muffling (muting) setting
MEMO
You can also change the value of this setting by using the [MUFFLING] knob.
Depth of the shell
Type of head
Type of beater
Resonance to the snare
Volume of low-frequency sound
Decay length of low-frequency sound
Amount of resonance for the entire drum kit
Explanation
Tuning of the head
MEMO
You can also change the value of this setting by using the [TUNING] knob.
Muffling (muting) setting
MEMO
You can also change the value of this setting by using the [MUFFLING] knob.
Depth of the shell
Type of head
Amount of overtone components
Tension of the strainer (resonating cords)
Volume of strainer
Cross-stick sound selection
Cross-stick sound volume
MEMO
The "XStick Volume" can also be edited from the KIT VOLUME screen (KIT VOL tab) (p. 15).
KIT EDIT
5