Room; Parameters Common To Room And Reverb; Parameters Specific To Room And Reverb - Roland VAD506 Data List

ROOM

Here you can apply either Room ambience or reverb effects to the drum kit.

Parameters Common to ROOM and REVERB

Parameter
[F1] button (OFF, ROOM ON)
[F2] button (ROOM tab)
Type
Level
[F3] button (SEND tab)
Room Send Volume
[F5] button (H & R)

Parameters Specific to ROOM and REVERB

ROOM
Parameter
Room Type
Distance
Time
REVERB
Parameter
Reverb Type
Pre Delay
Time
Density
Diffusion
LF Damp
HF Damp
Spread
Tone
Value
OFF, ROOM ON
ROOM, REVERB
-INF–+6.0dB
-INF–+6.0dB
H&R OFF, H&R ON
Value
SMALL STUDIO 1–4, LARGE STUDIO
1–4, LIVE HOUSE 1–4, STAGE 1–4,
MIDDLE HALL 1–4
0–6
-64–0
Value
ROOM 1, 2, HALL 1, 2, PLATE
0–100mSec
0.1–10.0Sec
0–127
0–127
0–100
0–100
0–127
0–127
Explanation
Turns the room effect on/off.
Type of room reverberation
Select either room or reverb.
Volume of reverb
Amount of room applied to each pad
Specifies whether head and rim of instruments are selected as a set (ON) or independently (OFF).
Explanation
Type of room
Sense of distance for the room's reverberation
Reverberation time of the room
Explanation
Type of reverb
Adjusts the delay time from the direct sound until the reverb sound is heard.
Time length of reverberation
Density of reverb sound
Change in the density of the reverb sound over time
The higher the value, the denser the sound becomes as time elapses (The effect is more obvious for
longer reverb times).
Adjusts the low-frequency region of the reverb sound.
Adjusts the high-frequency region of the reverb sound.
Spread of the reverb sound
Tonal character of reverb sound
KIT EDIT
13