11
8a
Insert sideburner burner into left shelf.
shelf, shown A.
Secure burner to sideburner drip pan with one Wing nut, shown B.
sideburner ignitor wire to electrode.
B
Wing nut
C
electrode
12
Place sideburner lid onto left shelf and align holes in back of lid with hinge holes. Secure lid to hinges using four #10-24x3/8"
screws, 5mm flat washers, 5mm lock washers, and #10-24 hex nuts.
Handle appearance may differ from actual part.
#10-24x3/8" screw
20
The stud on bottom of burner fits into rear small hole in sideburner drip pan on
Make sure burner tube
sideburner drip pan
ignitor wire
NOTE: Fully secure one hinge
with screws, washers and nuts,
then secure remaining hinge.
Sideburner lid
engages sideburner valve, shown C.
sideburner burner
sideburner drip pan
#10-24 hex nut
5mm lock
washer
5mm flat
washer
Under sideburner shelf, attach
A