Kyocera ECOSYS M5526cdn Operation Manual page 91

Installing and Setting up the Machine > Installing Software
2
3
4
Display the screen.
1
Select [Custom Install].
Install the software.
1
Select the device to be installed.
1
IMPORTANT
If Wi-Fi or Wi-Fi Direct is enabled, be sure to specify the IP address for the port name.
Installation may fail if the host name is specified.
NOTE
• The machine cannot be detected unless it is on. If the computer fails to detect the
machine, verify that it is connected to the computer via a network or USB cable and
that it is turned on and click
• If the desired device does not appear, select [Add custom device] to directly select
the device.
1 Click [View License Agreement]
2 Click [Accept].
2
2
(Reload).
2-41
and read the License Agreement.