Audio Dubbing - Sony SLV-X821MK2 Instruction & Operation Manual

Audio dubbing

Note
You must be in playback
pause mode before pressing
AUDIO DUB. (If you are in
recording pause mode, you
cannot use the audio
dubbing function.)
48 -EN
Editing
You can add music and songs on the normal audio track. The monaural
sound previously recorded is replaced while the original picture and hi-
fi sound on the main track are retained. (See page 29.)
How to hook up
COUNTER
RESET
AUDIO DUB
P PAUSE
Audio dubbing from a stereo system
Before you start editing
Connect audio source equipment to the LINE IN 2 AUDIO jacks of
this VCR.
Press INPUT SELECT to display "L2" in the display window.
1
Play a recording source. Search for the point to start
playback and set it to playback pause.
2
Open the drop down panel and insert the prerecorded
tape into this VCR.
Search for the end of the section you want to dub new
sound to and press P PAUSE.
Make sure that the tape has its safety tab in place so that you can
dub new sound onto it.
3
Press COUNTER RESET to reset the counter to
"0H00M00S."
4
Rewind the tape to the beginning of the section.
This VCR pauses.
5
Press AUDIO DUB.
The A-DUB indicator lights up in the display window.
LINE IN 2
AUDIO
RK-C510 audio cable
(not supplied)
: Signal flow
A-DUB
TV
Stereo system
REC OUT