Step 2 Setting Up The Remote Commander - Sony SLV-X821MK2 Instruction & Operation Manual

Step 2
Setting up the remote commander
6
-EN
Getting Started
Insert two R6 (size AA) batteries by matching the + and – on the batteries to
the diagram inside the battery compartment.
Using the remote commander
You can use this remote commander to operate this VCR and a Sony TV. Buttons on the
remote commander marked with a dot (•) can be used to operate your TV.
To operate
the VCR
a Sony TV
Notes
• The TV/VIDEO button selects the TV input either from the aerial in or line in. This button does not
control the VCR input.
• With normal use, the batteries should last for approximately three to six months.
• If you do not use the remote commander for an extended period of time, remove the batteries to avoid
possible damage from battery leakage.
• Do not use a new battery with an old one.
• Do not use different types of batteries.
Remote sensor
Set TV / VTR to
VTR and point at the remote sensor on the VCR
TV and point at the remote sensor on the TV
TV / VTR