Sony SLV-X821MK2 Instruction & Operation Manual page 11

Step 5
5
RF
CH SET
12
-EN
Getting Started
Tuning the TV to your VCR (continued)
Press RF CH SET.
You have now tuned your TV to the VCR. Whenever you play a tape, set the TV to the
program position selected in step 3 above.
Note
• If you set the wrong TV system, you may have no sound or sound may be distorted.
To check to see if the TV tuning is correct
Select the program position for video playback on the TV and press PROGRAM +/–. If
the TV screen changes to a different program each time you press PROGRAM +/–, the
TV tuning is correct.
To obtain a clear gray screen
If the gray screen does not appear clearly in step 4 above, go to step 5 to finish this
procedure once. Then start again from step 2. After pressing RF CH SET in step 2, press
PROGRAM +/– while the RF channel is displayed, so that another RF channel (between
28 and 55) appears (see page 20 for reference). Then tune the TV to the new RF channel
until a clear gray screen appears.