[Load All User Data]; [Initialize]; [Service Password] - Panasonic PT-RZ470UW Operating Instructions Manual

[LOAD ALL USER DATA]

Load the various setting values saved as a backup in the built-in memory of the projector.
1) Press as to select [LOAD ALL USER DATA].
2) Press the <ENTER> button.
f The [SECURITY PASSWORD] screen is displayed.
3) Enter a security password and press the <ENTER> button.
4) When the confirmation is displayed, select [OK] or [CANCEL], and press the <ENTER> button.
Note
f The projector will go into the standby status to reflect the setting values when [LOAD ALL USER DATA] is executed.

[INITIALIZE]

Return various setting values to their factory default settings.
1) Press as to select [INITIALIZE].
2) Press the <ENTER> button.
f The [SECURITY PASSWORD] screen is displayed.
3) Enter a security password and press the <ENTER> button.
f The [INITIALIZE] screen is displayed.
4) Press as to select an item to initialize.
[ALL USER DATA]
[ENTRY SIGNAL]
[NETWORK/E-MAIL]
[LOGO IMAGE]
5) Press the <ENTER> button.
6) When the confirmation is displayed, select [OK] or [CANCEL], and press the <ENTER> button.

[SERVICE PASSWORD]

This function is used by a service person.
Chapter 4 Settings — [PROJECTOR SETUP] menu
Returns all setting items including [ENTRY SIGNAL], [NETWORK SETUP], [E-mail set up], and
[USER LOGO] to factory default settings.
The projector will go into the standby status to reflect the setting values.
Deletes all the setting values saved for each input signal.
To delete only a part of a registered signal, perform the procedure described in "Deleting the
registered signal" (x page 94).
Returns [NETWORK SETUP] and [E-mail set up] to factory default settings.
Deletes the image registered in [USER LOGO].
ENGLISH - 91