Panasonic PT-RZ470UW Operating Instructions Manual page 103

f Do not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector from multiple
computers.
f Change the password first. (x page 113)
f The administrator rights allows to use all functions. The user rights only allows use of [Projector status] (x page 103), confirmation of the
error information page (x page 104), [Network status] (x page 105), [Basic control] (x page 106), [Advanced control] (x page 106),
[Change password] (x page 113).
f Access will be locked for few minutes when an incorrect password is entered three times consecutively.
f Some items on the projector setting page use the Javascript function of the web browser. The projector may not be able to be controlled
properly if it is set with a browser that does not have this function enabled.
f While updating the screen for the web control, the screen may become white for a moment, but it is not a malfunction.
Descriptions of items
1 Page tab
Switches pages by clicking this item.
2 [Status]
The status of the projector is displayed by clicking this item.
3 [Projector control]
The [Projector control] page is displayed by clicking this item.
[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
1 [PROJECTOR TYPE]
Displays the type of the projector.
2 [MAIN VERSION]
Displays the firmware version of the projector.
3 [POWER]
Displays the status of the power.
4 [LIGHT POWER]
Displays the setting status of [LIGHT POWER] (x page 77).
5 [SERIAL NUMBER]
Displays the serial number of the projector.
6 [NETWORK VERSION]
Displays the version of the firmware of the network.
7 [AV MUTE]
Displays the AV mute status.
Chapter 4 Settings — [NETWORK] menu
1
2
3
4
1
2
3
4
5
6
4 [Detailed set up]
The [Detailed set up] page is displayed by clicking this item.
5 [Change password]
The [Change password] page is displayed by clicking this item.
6 [CRESTRON RoomView]
The control page of RoomView is displayed by clicking this item.
8 [VOLUME]
Displays the volume status.
9 [INPUT SELECT]
Displays the status of the input selection.
10 [INTAKE AIR TEMPERATURE]
Displays the status of the air intake temperature of the projector.
11 [OPTICS MODULE TEMPERATURE]
Displays the status of the internal temperature of the projector.
12 [SELF TEST]
Displays the self-diagnosis information.
13 [PROJECTOR RUNTIME]
Displays the runtime of the projector.
5
6
7
8
9
10
11
12
13
ENGLISH - 103