Traffic Log Settings - Furuno Felcom 50 Operator's Manual

4.5

Traffic log settings

(owner level only, see "Shifting to owner level" on page 5-4.)
1 In the Main window, clicking Log opens the Traffic log window, which
displays the current log mode, number of unprinted calls, and whether
logging of incoming calls is enabled/disabled.
• Click Edit or
• Paused: any logging is off.
• Cleared: all log entries are deleted (incoming and outgoing).
• Enabled: outgoing logging is on.
• Enabled & Automatic printing to RS-232A*: output to local printer
• Enabled & Automatic printing to RS-232B*: output to local printer
Note: If the serial printer is not connected to RS-232A or RS-232B port, do
Scroll
• Scroll down
disable logging of incoming calls. Press ENTER to select.
Circuit switched calls:
2 Clicking Cct in the Traffic log (window 1 shown in the figure below) opens the
list of all call records except MPDS calls.
Print outputs all unprinted calls (marked with a star):
• Clicking Tag* marks all calls with a hash, which adds the records to the
printout file.
• Clicking Tag marks the selected call with a hash, which adds the record to
the printout file.
• Clicking Tag again untags a selected record.
3 Pressing
to open Logging mode window.
not choose item marked with
/ to wanted mode, and click or press ENTER to select.
to Log incoming calls and click Edit or
at a record when in window (2) displays detailed call data.
1
2
*
Call not yet printed
3
.
*
Automatic printing to RS-232A
Automatic printing to RS-232B
#
Tagged for printout
Hours:minutes:seconds
4. OPERATION FROM PC
to enable or
4-9