Furuno Felcom 50 Operator's Manual page 179

Alarms and Messages function
The following information may be read out:
Active alarms and warnings that are not yet read
Information log, list of previous alarm conditions, warnings and event
information
Clear cause log, list of abnormal conditions that have caused a call to be
cleared
Statistics list, statistics on terminal performance
Error log
Restart log
The Alarms and messages icon only appears when Set diagnostics is set to
On.
1 Double-click the Advanced functions icon to open the Configuration
menu.
2 Double-click the Configuration > Set diagnostics icons. Click On > Ok to
turn on diagnostics.
3 Double-click the Advanced functions icon again.
The Alarms and messages icon now appears in the Advanced functions
menu.
4 Double-click the icon to open the Alarms and messages menu. See next
page.
For printout, see "5.15 Print handling setup."
1
2
Exit Menu
3. Software
Exit Menu 1. Access
update prep.
control
SBS
1. ISDN
Exit Menu
configuration
9. Spot Beam
Report Method
3
7. TROUBLESHOOTING
4. Alarms 7.
and messages Configuration
2. Net service 4. Set 6. USB
providers diagnostics
7-5