Furuno Felcom 50 Operator's Manual page 40

4. OPERATION FROM PC
Note: It is recommended that the signal strength reading (S/N=Signal/Noise
ratio) should be at least 550, typically 600. The antenna will automatically
fine-tune to the best signal and accept it.
Clicking Seek starts the search again. If required, select a specific satellite by
clicking New.
See also "5.4 Selecting default Net service provider".
4 The equipment is ready for use when the Main window appears.
To make a connection, see "2.6 Making a call"
4-4
S/N ratio
SPT is shown with a spot beam selected.
Main window with "Diagnostic" ON