Xerox VersaLink C600N User Manual page 163

Probable Causes
Humidity is too high for coated paper.
The feed rollers are dirty.
Tray is loaded with mixed paper.
P P a a p p e e r r M M i i s s f f e e e e d d s s
Probable Causes
The paper is not correctly positioned in
the tray.
The paper tray is too full.
The paper guides are not correctly
adjusted to the paper size.
The tray contains warped or wrinkled
paper.
The paper is moist from humidity.
Using paper of the wrong size,
thickness, or type.
The feed rollers are dirty.
L L a a b b e e l l a a n n d d E E n n v v e e l l o o p p e e M M i i s s f f e e e e d d s s
Probable Causes
The label sheet is facing the wrong
way in the tray.
Labels are missing, curled, or pulled
away from the backing sheet.
Solutions
• Feed paper one sheet at a time.
• Try loading paper in the Bypass tray.
With a clean, lint-free cloth moistened with water, wipe the feed
rollers until they are clean. For details, refer to
Load the tray with only one type and size of paper.
Solutions
• Remove the misfed paper and reposition it properly in the tray.
• Adjust the paper guides in the tray to match the size of the
paper.
Remove some of the paper. Do not load paper past the fill line.
Adjust the paper guides in the tray to match the size of the paper.
Remove the paper, smooth it out, and reload it. If it still misfeeds,
do not use that paper.
Remove the moist paper and replace it with new, dry paper.
Use only Xerox approved paper. For more information, refer to
Supported Paper.
With a clean, lint-free cloth moistened with water, wipe the feed
rollers until they are clean. For more information, refer to
the Printer.
Solutions
• Load label sheets according to the instructions from the
manufacturer.
• Load labels in the tray, face up.
• For more information, refer to Labels.
Do not use any sheet where labels are missing, curled, or pulled
away from the backing sheet.
Xerox
Troubleshooting
Cleaning the
® VersaLink ® C600 Color Printer
User Guide
Printer.
Cleaning
163