Installing The Display Unit; Desktop, Overhead Mounting; Flush Mount - Furuno SC-50 Operator's Manual

1.4

Installing the Display Unit

1.4.1

Desktop, overhead mounting

1. Fasten the hanger to the mounting location with four tapping screws
(supplied). See the outline drawing for mounting dimensions.
2. Screw the knobs into the display unit.
3. Set display unit to the hanger and tighten the knobs.
4. Run the ground wire between the ground terminal on the display unit and the
ship's superstructure.
1.4.2

Flush mount

Two types of flush mounts are available. See the outline drawing at the back of
the manual for details.
Flush mount "F"
Flush mount "F" kit
Cosmetic Panel
Tapping Screw
Hex Bolt
Spring Washer
1. Make a cutout in the mounting location. The dimensions are 183(W) x 92(H)
mm.
2. Fasten the cosmetic panel to the display unit with hex bolts and spring
washers.
3. Fasten the display unit to the mounting location with tapping screws.
Desktop
Display unit mounting methods
Type: OP20-29, Code No: 000-041-405)
Name
20-016-1051
5X20
M6X12
M6
Overhead
Type Code No.
100-251-370
000-802-840
000-862-127
000-864-260
1. INSTALLATION
Qty
1
4
2
2
1-15