Chapter 3. Operating Instructions; Loading Documents On The Flatbed; Check The Document Condition - Fujitsu FI-4010CU Operator's Manual

Chapter 3. OPERATING INSTRUCTIONS

Place the documents into the ADF paper chute and scan using the ADF.
This section describes how to scan the document.
NOTE
Refer to "4.3.3" for periodic cleaning.

3.1 Loading Documents on the Flatbed

Place the document face down and align the top left corner with the reference mark.

3.1.1 Check the document condition

Follow the instruction below when the document is smaller than the Document bed.
CAUTION
Do not look directly at the light source during the read operation.
Document cover
Document holding pad
Document bed
Document
Reference mark
9