Fujitsu fi-4010CU Quick Installation Manual

Quick Installation Guide
Refer to the "fi-4010CU Image Scanner Operator's Guide" when you would
like to know more about the scanner.
Refer to the "Scanner Utility for Microsoft ® Windows ® User's Guide" on the
Scanner driver (CD-ROM) when you would like to know more detailed
information about the FUJITSU TWAIN32 Scanner driver installation.
1
Check the scanner and accessories
Confirm that all of the following items are included.
Scanner USB interface cable
(for EU)
ABBYY FineReader 6.0
User Manual
Adobe ® Acrobat ® 5.0
(CD-ROM) (CD-ROM)
(CD-ROM)
Scanner driver (CD-ROM)
2
Release the Shipping Lock
Slide the Shipping Lock to
"Release" position.
Lock
Release
3
Attach the ADF paper chute and Document stopper
1.
Attach the ADF paper chute A to the ADF unit so that the side guide
of the ADF paper chute faces up.
2.
Attach the ADF paper chute B to the ADF paper chute A so that the
flip out of part of the ADF paper chute B faces up.
3.
Insert the clows of the document stopper into the slots of the
scanner. Slide the document stopper in the direction of the arrow
marked on it to fix the stopper.
Carefully read the "fi-4010CU Image Scanner
Operator's Guide" before using this product.
Particularly read and understand the "Safety Precautions"
before using this product.
ADF paper chute B
AC cable ADF paper chute A
fi-4010CU Quick
Installation Guide
fi-4010CU Image Scanner
AC adapter
Operator's Guide
Shipping Lock
Make sure to slide the shipping lock in place
(located on the bottom of the scanner) to
secure the internal carrier unit during
transportation.
After transporting and placing the scanner,
tilt the scanner (approx. 30 degrees) and
release the shipping lock.
ADF paper chute B Flip out part
4
Connect the USB interface cable, ADF cable, and the AC cable
Confirm that the power of PC and the image scanner device is
Caution
turned off.
1.
Connect the PC end of the USB interface cable to the PC.
2.
Connect the scanner end of the USB interface cable to the scanner.
3.
Connect the ADF cable to the ADF cable connector of the scanner,
and fix the thumb screws of the ADF cable connector.
4.
Connect the AC adapter with the AC Cable, and then connect it to the
DC inlet on the Scanner.
5.
Pad ASY
Insert the AC cable into the power outlet.
Next, install the FUJITSU TWAIN32 Scanner driver.
Document stopper
5
Install FUJITSU TWAIN32 Scanner driver
Install the mini-driver first, and then the TWAIN data source. If the old version of FUJITSU TWAIN32 Scanner driver has
been installed on your personal computer, refer to the "Scanner Utility for Microsoft ® Windows ® User's Guide" on the
Caution
Scanner driver (CD-ROM), and update the mini-driver.
The Windows ® XP screen samples are shown below. The
screen and operations will differ slightly depending on the
OS that is being used.
Preparation
Confirm that the Scanner is connected to your personal
computer with the USB interface cable.
Installing the mini-driver
1.
Turn on the power by pushing the power switch in the back of
the scanner. The power lamp lights.
2.
Turn on your personal computer and log on to Windows ® .
When using Windows ® 2000 or Windows ® XP log on as
an administrator . The "Found New Hardware Wizard" dialog
box is displayed.
3.
Check "Install from a list or
specific location (Advanced)",
then click [Next].
Document stopper
For Windows ® Me check "Specify the location of the driver
(Advanced)", then click [Next].
For Windows ® 2000 and Windows ® 98, clicking on [Next]
the select search method screen is displayed.
• For Windows ® 98 select "Search for the best driver for
your devise (Recommended)" then click [Next].
• For Windows ® 2000 select "Search for a suitable driver
for my device (Recommended)" then click [Next].
ADF paper chute A
USB interface connector
USB interface cable
Windows ® 98, Windows ® Me, Windows ® 2000, Windows ® XP
4.
Insert the Scanner driver (CD-ROM).
When automatic start has been set, the "SETUP
DISK START UP SCREEN" is displayed. To close
Caution
this screen, click the [Exit] button on this
screen.
5.
Select "Search for the best
driver in these locations."
Check "Include this location
in the search:" then specify
D:\Driver2 (When your CD-
ROM is the D drive). After
that click [Next].
For Windows ® 98, just check "Specify a location:" then
specify D:\Driver2 (When your CD-ROM is the D drive).
After that click [Next].
For Windows ® Me, select "Find the most suitable driver
for the device being used" then click [Next]. Check
"Specify search location" then specify D:\Driver2 (When
your CD-ROM is the D drive). After that click [Next].
For Windows ® 2000, just check "Specify a location" and
then in the next screen specify "Copy manufacturer's files
from:" then specify D:\Driver2 (When your CD-ROM is the
D drive), then click [OK].
ADF cable connector
ADF cable
DC inlet
AC cable
Connect to your PC. Connect to the power outlet.
Continued on next page
P3PC-E117-02EN