Fujitsu ARXG22KMLB Design & Technical Manual page 185

• When function setting is "Forced stop" mode
– In the case of "Edge" input
Function
setting /
46-02
– In the case of "Pulse" input
Function
setting /
46-02
Indoor unit
Remote controller
NOTES:
• When the forced stop is triggered, indoor unit stops and Operation/Stop operation by the re-
mote controller is restricted.
• When forced stop function is used with forming a remote controller group, connect the same
equipment to each indoor unit within the group.
11-4. Ceiling type
Rotary SW of
External input and
output PCB
-
60-00 / 1
On
Input
Off
Forced stop
Normal
Operation
Indoor unit
Stop
Remote controller
Rotary SW of
External input and
output PCB
60-00 / 1
On
Input 1
Off
On
Input 2
Off
Forced stop
Normal
Operation
Stop
External input
Input of indoor unit Terminal
External input and
Input 1
output PCB
On
External input
Input 1
External input and
output PCB
Input 2
On
- 177 -
Input signal Command
Off → On Forced stop
On → Off Normal
Off → On Forced stop
On → Off Normal
On On
Input signal Command
Pulse Forced stop
Pulse Normal
On On
11. External input and output