BenQ SX751 User Manual page 56

FUNCTION
Picture Mode
Reference
Mode
Brightness
Contrast
Color
Tint
Sharpness
Brilliant Color
Color
Temperature
Color
Temperature
Fine Tuning
3D Color
Management
Reset picture
settings
56 Operation
DESCRIPTION
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See
picture mode" on page 36
Selects a picture mode that most suits your need for the image
quality and further fine-tune the image based on the selections listed
on the same page below. See
page 37 for details.
Adjusts the brightness of the image. See
page 37 for details.
Adjusts the degree of difference between dark and light in the image.
See "Adjusting Contrast" on page 37
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 37
The function is only available when Video or S-Video with NTSC
system is selected.
Adjusts the red and green color tones of the image. See
Tint" on page 37 for details.
The function is only available when Video or S-Video with NTSC
system is selected.
Adjusts the image to make it look sharper or softer. See
Sharpness" on page 37
The function is only available when Video or S-Video with NTSC
system is selected.
Adjusts white peaking while maintaining correct color presentation.
See "Adjusting Brilliant Color" on page 37
See "Selecting a Color Temperature" on page 38
See "Setting a preferred color temperature" on page 38
See "3D Color Management" on page 38
See "Resetting current or all picture modes" on page 39
for details.
"Setting the User 1/User 2 mode" on
"Adjusting Brightness" on
for details.
for details.
for details.
for details.
"Selecting a
for details.
"Adjusting
"Adjusting
for details.
for details.
for details.